ARDETEM marka ürünler Özhat tarafından Türkiyeye paralel ithalat yöntemi ile ithal edilmekte ve siz değerli müşterilerimize en hızlı şekilde teslim edilmektedir ARDETEM ürünlerinden websitemizde ürün numarası yer almasa bile teklif isteyiniz ; en kısa sürede teklifimiz tarafınıza ulaştırırılacaktır
YALNIZCA ORİJİNAL VE YENİ ÜRÜN SATIŞI YAPMAKTAYIZ
Özhat ARDETEM Markasının yetkili distribütörü veya temsilcisi değildir.
Firmamızın internet sitesinde ve katalogta gösterilen tüm markaların yetkili distribütör veya üretici temsilcisi olmayıp, bu sitede gösterilen Özel marka adları ve ticari markalar ilgili sahiplerinin mülkiyetindedir.
DRB-5 TPIs DIN-Schienen-Halter
Verbindungsklemme / Steckverbinder für
Hutschiene zur Spannungsversorgung und
Busverbindung
für zwei Geräte wird ein Stecker benötigt
Drehstrom Universal Analysator
Disturbancen
Drehstrom Universal Analysator für Störgrößen
3 oder 4 Leiter Drehstromnetze, Auslesen von
symmetrischen und unsymmetrischen Netzen
2 R-2 Relaisausgänge NO
F - Modbus TCP Ethernet Ausgang
Display: 96 x 96 mit Hintergrundbeleuchtung
Display für bis zu 50 Parameter
Ober- und Unterwellenanalyse
2 programmierbare Bereiche Spannung
Un=100V LN/ 173V LL und 330V LN/ 600V LL
2 programmierbare Bereiche Strom 0..1 A und 0..5
A
Universal Spannungsversorgung AC/DC
Reaktionszeit 40ms ( 2 Perioden )
Standard Ausgang RS 485 Modbus
Zolltarifnummer: 9030390090
Ursprungsland: Frankreich / EU
TPIs 50 N F/I-Wandler Ethernet
einkanaliger Frequenzwandler
Eingang: Kontakt, Logik, Namur, NPN/PNP
Analogausgang: 0 - 20 mA, 0 - 10 V
PC-programmierbar mit software SUPERVISION
über USB-Anschluss oder
über Ethernet
TPIs 12 Messumformer mit Prozesseingang 1
Analogausgang
Messumformer mit Prozesseingang im 7,2
mm-Gehäuse
Eingang: mA; mV; V
1 Analogausgang: 0 - 10 V; 0/4 - 20 mA aktiv
Spannungsversorgung: 24 VDC
PC-programmierbar mit Software SUPERVISION
über USB-Anschluss
Universal phase analyzer
Disturbancen
AC universal analyzer for interference
3 or 4 wire three-phase systems, reading
balanced and unbalanced networks
2 R-2 relay outputs NO
F - Modbus TCP Ethernet output
Display: 96 x 96 with backlight
Display up to 50 parameters
Upper and lower wave analysis
2 programmable voltage ranges
Un = 100V LN / LN 173V LL and 330V / 600V LL
2 programmable current ranges 0 to 1 A and 0 .5
A
Universal Power Supply AC / DC
40ms response time (2 periods)
Standard output RS 485 Modbus
Customs tariff number: 9030390090
Country of origin: France / EU
Anzeige mit bidirektionalem
Prozesseingang, Analogausgang + 2 Relais
Digitalanzeige 48 x 96mm, 4 digits
bidirektionaler Prozesseingang (mA, mV, V)
mA-Ausgang aktiv und 2 Relais
Universal-Spannungsversorgung 24 - 240VAC/DC
programmierbar über Fronttasten oder mittels PC
und software SUPERVISION
-Accuracy 0,1% of the full scale at +25 C
Thermic drift <150 ppm/C
-Measurable scale overstepping from -10% to +10%
-Scale factor programmable
-Enlarging effect-Square root extraction
-Special linearisation on 20 points
-Supply for 2 or 3 wire sensor 24 Vdc -25 mA protected from short circuits
-Accuracy 0,1% of the full scale at +25 C
Thermic drift <150 ppm/C
-Measurable scale overstepping from -10% to +10%
-Scale factor programmable
-Enlarging effect-Square root extraction
-Special linearisation on 20 points
-Supply for 2 or 3 wire sensor 24 Vdc -25 mA protected from short circuits
Anzeige 48 x 96mm mit
Universaleingang+ 2 Relais im Ausgang
Digitalanzeige 48 x 96mm, 4 digits
Universaleingang mA, V, Temp. Potentiometer,
Widerstand
2 Relais im Ausgang
Universal-Spannungsversorgung 24 - 240VAC/DC
programmierbar über Fronttasten oder mittels PC
und software SUPERVISION
Display with 48 x 96mm
Universal input + 2 output relays in
Digital display 48 x 96mm, 4 digits
Universal input mA, V, temp potentiometers,
resistance
2 relay output in
Universal power supply 24 - 240VAC/DC
Programmable via front keys or with PC
and software SUPERVISION
TPI 10 AR universal transmitter with
Analog output and 2 relays
TPI 10 AR
Universal Input: current, voltage, temperature
resistance
Output: Analog (current / voltage), 2 relays
Programmable with display / PC
Universal power supply: 20-300 VDC / VAC
power supply: 230VAC
network - single-phase, three-phase equi-imbalance 3/4-wire
input: TC:... /5A
Programmable IT and TP reports
3 high brightness displays of 4 digits each
41 measurable parameters: U, V, I, f, cos, P, Q, S, Ea, Er,...
RS485/422 digital output, Modbus/Jbus
Response time: 180 to 325 ms
format 96 x 96 mm
+tps case for peca30es
voltage inbox protection module
ELECTRICAL MEASURE CENTRAL
Current input: 1A and 5 A AC
Voltage input: 175 V and 600 V AC
For all network types
Graphical LCD with rear-lighting
28 measurable parameters: 3U, 3V, 3I, cos, f, F, P, Q, S, E...
Display of the energies on 8 digits on a single line with
automatic switching to the upper unit
Automatic correction of the wiring
Output: RS 485 Modbus/Jbus
Universal power supply; 20 to 270 vac and 20 to 300 vdc
Format: 96x96mm
AC MEASURE TRANSMITTERS - high insulation 4KV.
Input 0-5A and standard output 4-20mA
Galvanic partition: 4Kv
Accuracy rating: <0.3%
Power supply: 20 to 270 Vac and 20 to 300 Vdc
PROGRAMMABLE CONVERTER
Input: mA,mV,V.
Bidirectionnal current and voltage input up to +/- 300 V dc
Accuracy rating: 0.1%
Programmable scale factor
Supply for 2-wire sensor
Insulated analog output (voltage or current)
For DIN rail mounting
Programmable by software or µconsole (optional)
Universal power supply: 20 to 270 vac and 20 to 300 vdc
A three-phase analyzer for synchronous
networks
Three-phase analyzer for synchronous networks
DIN-rail mounting
AC indicator for exchange or
Three-phase systems
Voltage input 0 1 .150 VAC, 0 ... 600 VAC +
20%
1 Current input 0 .1 0 .5 A or A (automatic
switching)
Spanungsversorgung Universal AC / DC
Response time 40ms (two periods)
1 analogue output
Programmable with Display (LCD μCONSOLE)
or PC
