Tahliye ve Şarj İstasyonu
Material no.: 203-000040A
Flammable performance
Charging channels: 1024 for manual settings
Manual process: 1 channel
Number of models: 1024
Charging accuracy: ±0.5g <100g, ±0.5% >100g
Refrigerant type: R290
Refrigerant supply: Cylinder supply
Adapter mount: Left down (Left / Right is seen from the
station)
Included parts for installation:
- Inlet hose of 1 mtr incl. HK3 coupling (set)
- Air hose ø12 of 3 mtr incl. ½” threat (male)
- Supply cable of 3 mtr. Excl. Plug
AGRAMKOW PDC charging technology with DFC (Dynamic
Flow Compensation)
Vacuum circuit down to 0.02 mbar (abs) with active Pirani
sensor
Interfaces including hardware and application software for 2
potential free output (PASS and FAIL) and potential freeoutput (start welding) and 24VDC input (Welding done)
MPC2 (Multi-Purpose Controller) controller with alert
diagnostic monitor of flow, pressure and evacuation sensors,
refrigerant recovery, self-evacuation, 10/100Mbit Ethernet,
RS485, 2*USB1.1, CAN bus, RS232, IrDA communication
HMI (Human Machine Interface) TFT colour touch display for
process monitoring, receipt entering, I/O image, touch
control, process log, channels selection. Including light tower
with signal and warning lamps along with buzzer.
Language: German
Declaration of conformity according to ATEX directive
Including interface for SAFE-EN
NOTE: If the cylinder (or connection point of the supply) has
a build in check valve the supply hose to the SARAMAX-F
must be equipped with a 0.32 litre accumulator at min.