Astro ürünleri Türkiye satışı

Astro marka ürünler Özhat tarafından Türkiyeye paralel ithalat yöntemi ile ithal edilmekte ve siz değerli müşterilerimize en hızlı şekilde teslim edilmektedir Astro ürünlerinden websitemizde ürün numarası yer almasa bile teklif isteyiniz ; en kısa sürede teklifimiz tarafınıza ulaştırırılacaktır

YALNIZCA ORİJİNAL VE YENİ ÜRÜN SATIŞI YAPMAKTAYIZ

Özhat Astro Markasının yetkili distribütörü veya temsilcisi değildir. Firmamızın internet sitesinde ve katalogta gösterilen tüm markaların yetkili distribütör veya üretici temsilcisi olmayıp, bu sitede gösterilen Özel marka adları ve ticari markalar ilgili sahiplerinin mülkiyetindedir.

İlave döküman , Datasheets, Foto, Katalog

Astro katalog

Astro ürünler

Synchron-Getriebemotor ASM 26 SG 10 3-400 V, 50/60 Hz, 1000/1200 Upm Klemmkastenausführung ohne Deckel mit Stirnradgetriebe SG 10 i = 250:1, n2 = 4/4,8 Upm, Kunststoffgehäuse 2. Wellenende nach Zeichnung
motor 230V 50/60Hz 46mA
Senkron dişli motor

3 - 400V, 1000/1200 Upm, 50/60Hz, S1, IP 65, M16, Metall-Klemmkasten, mit Stirnradgetriebe SG 10, i= 333,33:1, n2 = 3/3,6 Upm, Welle d = 8mm, l = 25 mm, mit Fläche 7x21 mm, Metallausführung, Welle um 180° zum Standard gedreht, Typenschild um 180° zum Standard versetzt

senkron dişli motor

3~400V, 50/60Hz, 1000/1200 rpm, Terminal box, M 16, IP 54 with ASG 10 i = 333, 33:1, helical gear n2 = 3/3.6 rpm, metal version Wave with surface

VOLTAGE REGULATOR
Driving Motor EAB-REFERENCE : 5772-0001,
senkron redüktörlü motor

Art. Nr 35001478

senkron motor

Synchronous motor ASM 44 1~230 V, 50/60 Hz, 1500/1800 rpm, S1, IP 40, Leads 200 mm capazitor C = 0,5μf, Shaft d = 5 mm, l = 20 mm Weight: approx. 1 kg

Senkron dişli motor

Synchronous-gearmotor ASM 24 SG 10 1 ~230 V, 50/60 Hz,1500/1800 Upm, S1, IP40,M16,number cable 3m, capacitor C =0.27 uF, with spur gear unit ASG 10 i=200:1, n2=7.5/9 Upm, shaft d = 8 mm, l=35 mm, with flat, reinforced bearings, plastic version,1st wheel steel

Senkron redüktör

27111502 3-400 V, 50/60 Hz, 1500/1800 Upm, S1, IP 65, M 16, 20 W, Isolation class F,metal terminal box, with Plantery gear box APG 2550, i= 150:1,n 2 = 10/12 Upm max. load 25 Nm, shaft d = 12 mm, |= 25 mm with adjusting spring 4x4x16, torque 13,5 Nm, include TKO 100C

Senkron redüktörlü motor

1-230 V, 50/60 Hz, 1000/1200 rpm, S1, Input power 41.4 VA IP 40, terminal box, capacitor C=1 HF/600 V built-in, output power 23 W, with helical gear ASG 10, i = 83, 33:1, n2 = 12/14.4 rpm, metal housing, shaft d =8 mm, I=25 mm Torque 14.30 Nm

Senkron redüktörlü motor

3~400V, 50 Hz, 1000 rpm, S3 75%ED, IP 65, M16, Metal terminal box, with planetary gear PG 2550 i = 308:1, n2 = 3.2 rpm, nameplate 180° to Default Offset

senkron dişli motor

1-230 V, 50/60 Hz, 1000/1200 rpm, input power 19.6 VA, output power 10.5 W, M 16 axial terminal box, capacitor C = 0.5 uF/600 V built-in, with ASG 10 helical gearbox i = 200:1, n2=5/6 rpm, metal housing, shaft d = 8 mm, I = 25 mm, with area 7 x 21 mm, cable 0,5 m, without PLUG

senkron dişli motor

3~230 V, 50/60 Hz, 1000/1200 rpm, 7.8 W, S1, IP 54, M16 axial with cable 2000 mm long, with helical gear SG 60 i = 333, 33:1, n2 = 3/3.6 rpm, shaft d = 8 mm, I = 25 mm, with woodruff key 2x3.7

senkron dişli motor

ASM 86 SG 10 3~70 V, 133-250 Hz, 2666-5000 rpm, IP 40, terminal box, with spur gear ASG 10, 1 = 33, 33:1 n2 = 80/150 rpm, metal case zinc die casting, torque in speed range 2.5 Nm, unshielded cable 300 mm PD000811

senkron dişli motor

Type ASM 26 SG 10 3-400 V, 1000/1200 rpm, 50/60 Hz, S1, IP 65, metal terminal box, with spur gear SG 10, i=333, 33:1, n2 = 3/3.6 rpm, shaft d=8mm, I=25 mm, with area 7x21 mm, metal version, shaft turned 180 to standard, nameplate offset 180 to standard

senkron dişli motor

1-230 V, 50/60 Hz, 1500/1800 rpm, S1, 10.5 W, IP 40, Cable with capacitor С = 0.5 in the case, cable length from engine to case 40 cm, from enclosure 60 cm from enclosure, total length from engine 100 cm with helical gear ASG 13 i = 250:1, n 2 = 6/7.2 rpm, metal version, shaft d = 8 mm, Special shaft with flat, anti-clockwise rotation!

senkron dişli motor

3-460 V, 60 Hz, 1800 rpm, S1, IP40, M16, number cable 3 M, with spur gear ASG 10 i = 750:1, n2 = 2.4 rpm, shaft d= 8mm, I= 35 mm, flattened, plastic version, reinforced bearings