Beamex ürünleri Türkiye satışı

-1/+20 bar (uncertainty 1 year 0.01% FS + 0.025% reading)

MEASURING:-45…140 °C ACCURACY:±0,1 °C Full range STABILITY:±0,005°C DIVING DEPTH:160 mm (6.3 in) DIP CELL:MB140-MH1 (3mm, 4mm, 6mm, 8mm, 10mm, 1/4") HEATING TIME: 32 MIN. ; 23°C…140°C 45 MIN -45°C…140°C COOLING TIME:44 MIN 23°C…-45°C 19 MIN 23°C…-45°C 19 MIN 23°C…30°C 19 MIN 140°C…230°C RESOLUTION: 0,001°C Accredited calibration certificate and will be delivered with special aluminum carrying case.

with insert MB700-MH1 Thermal Well or Furnace with temperature range at 23º C: 50 °C … 700 °C (122 °F … 1,292 °F). Reading accuracy: ±0.2 °C at 425 °C; ±0.25°C at 660°C. Stability: ±0.005 °C at 100 °C; ±0.01°C at 425°C ; ±0.03°C at 700°C Axial uniformity at 40mm(1.6”): ±0.09 °C at 100 °C ; ±0.22°C at 425°C ; ±0.35°C at 700°C. Radial uniformity: ±0.01 °C at 100 °C; ±0.025°C at 425°C; ±0.04°C at 700°C. Load effect (with one 6.35 mm reference probe and three 6.35 mm probes): ±0.02 °C at 425 °C ; ±0.04°C at 700°C. Hysteresis: ±0.07°C. Immersion depth: 203 mm (8"). Insert Outer Diameter: 29.2mm (1.15"). Heating time 46 min: from 50 °C … 700 °C. Cooling time 235 min: from 700 °C … 50 °C; 153 min: from 700 °C … 100 °C. Resolution: 0.001 °C / °F. LCD display: °C or °F user selectable. Power supply: 230 Vac (±10%), 50/60 Hz, 1,025 W; 115Vac (±10%), 50/60Hz, 1025W. Computer interface: RS-232. It must have a multi-hole insert of 3 mm, 4 mm, 6 mm, 8 mm, 10 mm and ¼”. Portable case of the thermal well for the field. In addition to including adapter cable for use with different respective manuals.

Beamex MC2-MF Multifunction Calibrator Includes pressure, temperature and electrical sections Accredited calibration certificate is included as standard for MC2-MF and internal/external pressure measurement modules. Thermocouple type K and RTD type Pt100@385 calibrated as standard. For others please request pricing. NiMH battery pack and charger Test leads and clips Accredited calibration certificate User guide USB cable 1/8" BSP female pressure connector with 6mm adapter MC2-MF is equipped with one of the following pressure transducers Includes Internal 20C (-1 to 20Bar g) Weight 1kg

Portable multifunction calibrator for temperatures and electrical signals with Documenting function without internal pressure module Measurement of current (+/- 100 mA) and voltage (-1/+60 VDC) • Measurement and generation of low voltages (-25/150 mVolt) • Generation of voltages (-3/12 Volts) and currents (0-25 mA) • Measurement and simulation of resistances (0-4000 Ohm) • Measurement of frequencies (up to 50 kHz) and pulses (up to 9 999,999) • Generation of frequencies (0.0005-10,000 Hz) and pulses (0-9 999 999) • Measurement and simulation of thermocouples (13 types) and thermoresiors (13 types) • Integrated compensation for the cold joint of thermocouples • Measurement loop supply: 24 VDC compatible with Hart circuits • Integrated test switch • 30 selectable pressure measurement units + 4 user-adjustable Large graphic LCD display with backlight for the simultaneous display of 2 measurement parameters (e.g.: pressure and mA or temperature and mA) • Possibility to connect external pressure modules to extend the operating range • Power supply: internal NiMH rechargeable batteries • Highly protective membrane keyboard • Dimensions and weight: 215mm x 102mm x 49mm - 830 gr • Result documentation function integrated into the tool for interfacing to Beamex software (optional) • Supplied complete with rechargeable batteries and battery chargers, cables and test tips, USB cable, instruction manual and calibration certificate issued by a FINAS accredited laboratory (Finnish calibration body), equivalent to national standards; for temperature ranges, the standard certification includes T/C type K and Pt100)