Belzona ürünleri Türkiye satışı

Belzona marka ürünler Özhat tarafından Türkiyeye paralel ithalat yöntemi ile ithal edilmekte ve siz değerli müşterilerimize en hızlı şekilde teslim edilmektedir Belzona ürünlerinden websitemizde ürün numarası yer almasa bile teklif isteyiniz ; en kısa sürede teklifimiz tarafınıza ulaştırırılacaktır

YALNIZCA ORİJİNAL VE YENİ ÜRÜN SATIŞI YAPMAKTAYIZ

Özhat Belzona Markasının yetkili distribütörü veya temsilcisi değildir. Firmamızın internet sitesinde ve katalogta gösterilen tüm markaların yetkili distribütör veya üretici temsilcisi olmayıp, bu sitede gösterilen Özel marka adları ve ticari markalar ilgili sahiplerinin mülkiyetindedir.

İlave döküman , Datasheets, Foto, Katalog

Belzona katalog

Belzona ürünler

Description: Polymer system designed for protective restoration of worn metal surfaces in fluid systems subjected to erosion and corrosion. Machine-processable product. Application: Centrifugal and turbine pumps, heat exchangers, water covers trunks, valves, pump wheels, tetheats, pipe elbows, nozzles, etc. Technical parameters: Temperature resistance: - 40 ÷ + 93 ° C in immersed state and up to + 200 ° C in dry environment Packaging volume Belzona 1111 of 1 kg - 398 cm3

Süper E Metal

Packaging: package 125 gr Manufacturer: Belzona Polymerics Ltd., UK Description: Polymer systems designed for emergency or emergency restoration of worn metal surfaces subjected to erosion and corrosion or pipe breakage. Machinable product. Application: Centrifugal and turbine pumps, heat exchangers, water caps chests, valves, pump impellers, aunts, pipe elbows, nozzles, etc. Technical parameters: Temperature resistance: - 40 ÷ + 93 ºС in submerged state and up to + 200ºС in dry environment Package volume Belzona 1221 from 1 kg - 550 cm3

Belzona 1812 Seramik Karbidlе FP

Article: Metal abrasion resistant polymer Name Belzona® 1812 (Ceramic Carbide FP) Dimensions: Packing (packing): 2 kg. Manufacturer: Belzona Polymerics Ltd., United Kingdom Ingredients: Base and hardener Description: Two - component polymeric material for abrasion protection, based on polymers and high molecular weight oligomers in combination with abrasion-resistant ceramic fillers (SiC) Application: Pipe bends, deflector plates, wear-resistant plates, centrifuges, mixers Technical parameters: Consumption rate: 1 kg. has a volume of 442 cm3 and covers an area approximately 0.149 m2 (at layer thickness min. 3 mm), respectively. pack of 2 kg will covers an area of about 0.294 m2 Abrasion resistance: For 1kg of load, the loss per 1000 cycles is the same follows: H 10 disk (wet) - 51 mm3 CS17 disk (dry) - 8 mm3 Adhesion: Tested according to ASTM D 1002 = 137 kg / cm2 Pressure resistance: Tested according to ASTM D 695 = 536 kg / cm2 Temperature resistance: For dry applications the product is stable up to 150˚С (see enclosed product specification)

D & A Hi-Yapı Elastomer

package 500 gr

İçi boş-Coat 750 gr

Elastomer QD Kremi

0.125 KG CODE 940 (1 pack 1x 0,125 kg)

Elastomer Conditioner

Elastomer QD Conditioner

Magma Quartz 15kg

ana kat uygulaması / 15 kg

Immersion Sınıf

Anti-yapışkan hazırlık

1 pack = 0,100 kg

Ceramic R-Metal

Polymer system designed for the recovery of metals in fluid systems subject to erosion-corrosion. Ceramic, non-machinable product Application: Centrifugal and turbine pumps, heat exchangers, water caps chests, valves, pump impellers, aunts, pipe elbows, nozzles Technical parameters: Consumption rate: 2 kg. Belzona 1311 = 826cm3 Pressure resistance: Tested according to ASTM D695 - 930 kg / cm2 Corrosion resistance: Shows no visible signs of corrosion after 5000 hours of salt spray on ASTM B117 standard. Heat resistance: up to 200C dry environment up to 60C humid environment up to 90C when applying 3 coats (or more)

Polymeric systems designed for the recovery of metals in fluid circuits, subject to erosion-corrosion. ceramic, product

Metal polimer

Country of origin - UK Description: Polymer system designed for protective coating of metal Surfaces in fluid systems subject to erosion and corrosion. Ceramic, non-machinable product Application: Centrifugal and turbine pumps, heat exchangers, water covers Trunks, valves, pump wheels, tetheats, tubular elbows, Nozzles. Technical parameters: Machine tool Temperature resistance: - 40 ÷ + 93 ° C in immersed state and up to + 200 ° C in dry environment Packaging volume 1 kg - 398 cm3

Makine işleme metal polimer

Belzona Polymerics Ltd., United Kingdom Description: Polymer system designed to protect the worn metal surfaces in fluid systems subjected to erosion and corrosion. Machine-processable product. Application: Centrifugal and turbine pumps, heat exchangers, water covers trunks, valves, pump wheels, tetheats, pipe elbows, nozzles, etc. Technical parameters: Temperature resistance: - 40 ÷ + 93 ° C in immersed state and up to + 200 ° C in dry environment Packaging volume Belzona 1111 of 1 kg - 398 cm3

metal polymer Box with packages for both components with a total net weight of 1 kg Belzona Polymerics Ltd., UK Two-component metal polymer Repair and restoration of machine parts and equipment requiring prolonged or large-scale repairs Product which can be processed wiht machine Temperature resistance: - 40 ÷ + 93 º C in submerged and +200 º C in a dry environment Volume of 1 kg of mixed product - 395 cm3