Brilex ürünleri Türkiye satışı

Replacement for serial number 1502070, 1401003, 1112130, 0020069849. 1005-9309-00 Type: Curved bursting disc Dimension: 586X920 Bursting area: 5,350 cm2 Option: default Material: 1.4301 Opening pressure: 0.100 bar Opening temperature: 20.0 °C Opening pressure tolerance +/-: 0.010 bar Vacuum resistance: 2,000 mmWs Minimum temperature: -40.0 °C Maximum temperature: 120.0 °C Sealing material: EPDM foam tape Type of insulation material: None Grounding strap: no

Old Matnr.: 67-170451-000 with 2m connection cable UI < 40V Ii < 57mA Li, Ci negligible II 2G Ex ib IIC T4 (GB) II 2D Ex ib IIIC T 85°C IP65 (dB) -25°C < Ta < +80°C ibexu11ATEX1017 with mounting bracket

Frame inside dimension: 1130 x 1130Entlastungsflaeche Aw: 12,500 cm²Entlastungsfaehigkeit EF: 100%Berstueberdruck Pstat: 0.1 bar at 20 Celsius

Standard Explosion Vent Flat Rectangular Burst Pressure:0.10BarG +-25% @15-30C To 1/3 SPECIFICATION Max Working Pressure:0.05 BarG @15-30C 1/3 SPECIFICATION Standard Explosion Vent Flat Rectangular Rectangular Explosion Vent External Size: 1220mm x 735mm Internal Size: 1140mm x 655mm Vent Area: 0.72m2 Top Section:Austenitic Stainless Stell Seal Membrane:Fluoropolymer(Over 120 C Aluminium Bottom Section:Austentic Stainless Steel Burst Pressure: 0.10 Bar G +/ 25% Temperature Coefficient to Drawing 00/00/08115 This Explosion Vent has a hole Pattern designed to be installed into a frame supplied by Elfab.This Assembly meets the requirements of directive 94/9/Ec (Atex) The User must conduct their own risk assessment if they intent to use either a different hole pattern or a non elfab supplied frame hole pattern to Elfab Standard)

Standard Explosion Vent Flat Rectangular Burst Pressure:0.10BarG +-25% @ 15-30 C To 1/3 SPECIFICATION Maximum Working Pressure:0.05BarG @ 15-30 C 1/3 SPECIFICATION Standard Explosion Vent Flat Rectangular Rectangular Explosion Vent External Size:1100 mm x 600 mm Internal Size: 1020 mm x 520 mm Vent Area: 0.52 Top Section Austenitic Stainless Steel Seal Membrane:Flouropolymer (Over 120C Aluminium) Bottom Section :Austentic Stainless Steel Burst Pressure:0.10 BarG +/ 25% Temperature Coefficient to drawing 00/00/08115 This explosion vent has a hole pattern designed to be installed into a frame supplied by Elfab.This assembly meets the requirements of directive 94/9/Ec(Atex) the user must coduct theus own risk assessment if they intend intend to use either a different hole pattern or a non Elfab supplied frame hole pattern to Elfab Standard

mit 2m Anschlusskabel Ui < 40V Ii < 57mA Li, Ci vernachlässigbar II 2G Ex ib IIC T6 (Gb) II 2D Ex ib IIIC T 80°C IP65 (Db) -25°C < Ta < +80°C IBExU11ATEX1017 mit Montageanleitung Gewicht: 0,1 kg Zolltarifnummer: 90262080

KE/1130X1130 Type: Fl. Rusting disc with counterflute Size: 1130X1130 Bursting area: 12,500 cm2 Option: Rolled upright Material: 1.4404 Opening pressure: 0,100 bar Opening temperature: 20.0 °C Opening pressure tolerance +/-: 0.010 bar Vacuum resistance: 200 mmwC Minimum temperature ፦50.0 °C Maximum temperature: 200.0 °C Sealing material: food silicone Insulation material type: aluminium cassette with glass wool Insulation thickness: 80,000 mm Roll diameter: 3,400,000 mm Grounding tab: no

mit 2m Anschlusskabel Ui < 40V Ii < 57mA Li, Ci vernachlässigbar II 2G Ex ib IIC T6 (Gb) II 2D Ex ib IIIC T 80°C IP65 (Db) -25°C < Ta < +80°C IBExU11ATEX1017 mit Montageanleitung Gewicht: 0,1 kg Zolltarifnummer: 90262080

Mat. Nr. 1006-0861-00 2m Kabel Warentarifnummer: 90262080 Nettogewicht gesamt: 200 G Wareneingangskontrolle: Prüfen Sie alle Sensoren direkt nach Wareneingang auf einen maximalen Widerstand von 8 Ohm um einen Sensorbruch auszuschliessen. Einen Transportschaden erkennen wir nur innerhalb der Meldefrist von 48 Stunden nach Anlieferung an. Danach geht das Risiko des Sensorbruchs auf den Kunden über.

curved design with pressure tip damping and integrated flange seal; testing and documentation in accordance with CEN/TC 305/WG 3/SG 2, EN 10204 3.1 B and ATEX 95 (94/9/EC) test no. FSA 03 ATEX 1508 X; For installation with additional counter flange (counter flange not included); with assembly instructions and flange drawing Type: GE 1000 Internal frame dimensions: 586 x 920 Relief area Aw: 5350 cm² Relief capacity EF: 100% Burst pressure Pstat: 0.1 bar at 20 °C Negative pressure resistance: 1000 mm WS Temperature resistance: -40 - +120 °C Material: 1.4301 Seals: EPDM Maximum KST value: 650 bar m/s

Old Matnr.: 3870394 Goods tariff number: 73269098 Total net weight: 3,020 KG Type : Fl. Rupture disk without counterfl. Size : 410X410 Bursting area: 1,650 cm2 Option : default Material : 1.4301 Opening pressure: 0.100 bar Opening temperature: 20.0 °C Opening pressure tolerance +/- : 0.010 bar Vacuum resistance : 500 mmWC Minimum temperature : -40.0 °C Maximum temperature : 120.0 °C Gasket material : EPDM foam tape Insulation Material Type : None Grounding Lug : No