Erichsen marka ürünler Özhat tarafından Türkiyeye paralel ithalat yöntemi ile ithal edilmekte ve siz değerli müşterilerimize en hızlı şekilde teslim edilmektedir Erichsen ürünlerinden websitemizde ürün numarası yer almasa bile teklif isteyiniz ; en kısa sürede teklifimiz tarafınıza ulaştırırılacaktır
YALNIZCA ORİJİNAL VE YENİ ÜRÜN SATIŞI YAPMAKTAYIZ
Özhat Erichsen Markasının yetkili distribütörü veya temsilcisi değildir.
Firmamızın internet sitesinde ve katalogta gösterilen tüm markaların yetkili distribütör veya üretici temsilcisi olmayıp, bu sitede gösterilen Özel marka adları ve ticari markalar ilgili sahiplerinin mülkiyetindedir.
Sheet Metal Testing Machine, Model 100
with manual operation, maximum drawing force 30 kN and
compliance with the standard adjustable constant blank holding pressure max.
10 kN, with Tiefungsanzeige by counting with 0.1 mm
Reading accuracy as well as a Test Tool No. 27 after
EN ISO 20482, for testing the deep drawability of sheet metal
and bands from 0.1 to 1.5 mm thick (² at approximately 400 N / mm strength)
in widths of 13-90 mm, by means of the
Erichsen cupping test according to EN ISO, EURO NORM,
BS, NF, GOST, UNI, UNE.
Weight: approximately 36 kg net
Dimensions: approx 340 x 350 x 450 mm (L x W x H)
[multi cutting device 295 / I
with 6 blades and cutting distance 1 mm for cross-cut
tests in accordance with EN ISO, ISO, VDA and EN, incl Motion,
Polyamide bristle brush and plastic case]
(mit 6 Schneiden und Schnittabstand 1 mm für Gitterschnitt-
prüfungen nach EN ISO, ISO, VDA und EN , inkl. Lupe,
Polyamidborsten-Bürste und Kunststoffkoffer)
mit 6 Schneiden und Schnittabstand 1 mm für Gitterschnittprüfungen
nach EN ISO, ISO, VDA und EN, inkl. Lupe,
Polyamidborsten-Bürste und Kunststoffkoffer.
Einschneidengerät 295/XIV,hartbeschichtete Prüfspitze montiert in Adapterblock mit Halter, für Schnitte auf gekrümmten
Oberflächen, inkl. flexiblem Lineal und
Kunststoffkoffer, ohne Herstellerprüfzertifikat M
(mit 6 Schneiden und Schnittabstand 2 mm für Gitterschnitt-
prüfungen nach EN ISO, ISO, ASTM, JIS und VDA, inkl. Lupe,Polyamidborsten-Bürste und Kunststoffkoffer)
(mit 6 Schneiden und Schnittabstand 2 mm für Gitterschnitt-
prüfungen nach EN ISO, ISO, ASTM, JIS und VDA, inkl. Lupe,
Polyamidborsten-Bürste und Kunststoffkoffer)
(with 6 blades, cutting distance 2 mm for cross-cut
tests according to EN ISO, ISO, ASTM, JIS and VDA, incl. magnifying glass
Nylon bristle brush and plastic case)